Publications about Polyvinyl Chloride (PVC) Plastisols from the Polymer Library
The following truncated abstracts are selected from Rapra's web based Polymer Library. By clicking on the 6 digit accession number or title, a Copyright Cleared copy of the full-text article can be ordered. For more information about our free Polymer Contents service or subscription based Polymer Library , please go to http://www.PolymerLibrary.com
| 972390 | PROTECTIVE COATINGS BASED ON PVC PLASTISOLS . |
| The development is described of protective coatings for vehicle underbodies, based on PVC plastisols. The formulation of such coatings is discussed in terms of the selection of plasticiser, diluent, viscosity modifier, primer, adhesion promoter, and mineral fillers, and the use of domestic versus im ......... | |
| (The original document is in English and was published in 2006). | |
| 966497 | DEVELOPMENT OF PVC/SILICA HYBRIDS USING PVC PLASTISOLS. |
| The development of a plasticised poly(vinyl chloride)(PVC) with increased porosity by the use of an organic-inorganic hybrid based on silica produced in-situ in the PVC plastisol from tetraethoxysilane via a hydrolytic sol-gel process and gamma-glycidyloxypropyltrimethoxysilane as coupling agent is ......... | |
| (The original document is in English and was published in 2006). | |
| 963214 | INFLUENCE OF ORGANIC DILUENTS AND A SOLVENT ON RHEOLOGICAL PROPERTIES OF PVC PLASTISOLS . |
| Rheological studies were conducted of PVC plastisols with dibutyl phthalate, di-2-ethylhexyl phthalate or dibutyl sebacate as plasticisers, with addition of diluent and a solvent (cyclohexanone). The dependence of viscosity of a composition on shearing stress was described by the Ostwald-de Waele eq ......... | |
| (The original document is in Polish and was published in 2005). | |
| 955404 | ANALYSIS OF THE INFLUENCE OF THE COMPONENTS OF AQUEOUS DISPERSION OF PVC PLASTISOL ON ITS STABILITY. |
| The results are reported of a study of the effects of surfactants (ethoxylated fatty alcohol, vegetable oil glyceride, alkyl phenol, amide or alkylbenzenesulphonate), a water-borne PU oligomer as dispersion stabiliser, diluents (xylene, butyl acetate or butanol) and solvents (cyclohexanone) on the s ......... | |
| (The original document is in Polish and was published in 2005). | |
| 941918 | ROTATIONAL MOULDING OF PVC PLASTISOL . MODELLING OF INITIAL STAGES OF GELATION. |
| The viscosity during the early stages of the gelation process of plastisols formulated with fifteen different commercial plasticisers was obtained. Plastisols prepared were rotationally moulded and the mouldings obtained were characterised according to their wall thickness distribution. This paramet ......... | |
| (The original document is in English and was published in 2005). | |
| 941913 | NON-LINEAR VISCOELASTIC BEHAVIOR OF PVC PLASTISOL . |
| The strain-dependent viscoelastic behaviour of a PVC plastisol (Geon 124A) was studied at small and large amplitude and the steady state viscosity and normal stress were determined. The results obtained are presented and discussed with particular reference to strain-amplitude- dependent growth of im ......... | |
| (The original document is in English and was published in 2005). | |
| 935643 | WETTING AND DISPERSING AGENTS FOR PIGMENTS, BLOWING AGENTS IN PLASTICISERS PASTES/ PVC - PLASTISOLS . |
| New wetting and dispersing agents for pigments, blowing agents and fillers are examined. Stable systems are required when dispersing the solid particles in plasticisers or PVC-plastisols. The choice of the appropriate wetting agent and dispersing agent is shown to provide improvements with reference ......... | |
| (The original document is in English and was published in 2004). | |
| 923019 | RUTLAND PLASTICS TECHNOLOGIES PVC PLASTISOL OFFERS NEW PULTRUSION CAPABILITIES. |
| Rutland Plastics Technologies has introduced PVC plastisol resin for pultrusion and other processes. Rutland calls the material SEP (Structural Engineered Plastisol) resins for use in conventional composite processes, but also for opening opportunities in extrusion. SEP resins are a quasi-thermoplas ......... | |
| (The original document is in English and was published in 2004). | |
| 908509 | INFLUENCE OF CRYSTALLINITY IN THE CURING MECHANISM OF PVC PLASTISOLS . |
| The effect of the crystalline areas observed in PVC on the mechanical and thermal properties of PVC plastisols was studied. Several commercial PVC resins were used to obtain a broad range of molec.wts. and processing conditions for PVC plastisols. The gelation process was studied at different temper ......... | |
| (The original document is in English and was published in 2004). | |
| 906772 | RHEOLOGY OF PVC PLASTISOL - VIII: MECHANISM OF NON-LINEAR VISCOELASTIC BEHAVIOR. |
| The mechanism of the non-linear strain-amplitude dependence of viscoelastic properties of a poly(vinyl chloride) plastisol was investigated for a range of amplitudes and frequencies, and the shear rate dependence of steady state flow data was analysed. The results are discussed in terms of shear-ind ......... | |
| (The original document is in English and was published in 2003). | |
| 903357 | RHEOLOGY OF PVC PLASTISOL - XI VISCOSITY AGING, MECHANISMS AND PLASTICIZER TYPES. |
| An investigation was carried out into the effect of plasticisers on the viscosity ageing PVC plastisols through deagglomeration. Tests were carried out on PVCs containing different emulsifiers and seven plasticiser systems. Plasticisers employed included three phthalates, an azelate and three plasti ......... | |
| (The original document is in English and was published in 2003). | |
| 890019 | RHEOLOGY OF PVC PLASTISOL - X. VISCOSITY AGING, MECHANISMS AND RESIN TYPES. |
| Mechanisms of viscosity-ageing, the phenomenon of viscosity increase with time, of PVC resins for plastisol applications was investigated for resins having friable or non-friable agglomerates, using di-2-ethylhexylphthalate as plasticizer, by particle size distribution analysis and by scanning elect ......... | |
| (The original document is in English and was published in 2003). | |
| 879125 | EFFECT OF PHYLLITE AS A FILLER FOR PVC PLASTISOLS . |
| Phyllite (containing quartz, muscovite and kaolinite) was compared with calcium carbonate as a filler for poly(vinyl chloride) (PVC) plastisols. Compositions suitable for the manufacture of lower and superior grade balls, and artificial leather were prepared and characterised by measurements of visc ......... | |
| (The original document is in English and was published in 2002). | |
| 877704 | THE POTENTIAL RECOVERY OF PLASTICISER AND SOLVENT FROM WASTE PVC PLASTISOLS USING MEMBRANE SEPARATION TECHNOLOGY. |
| In the production and use of plastisols, waste can arise through a number of operations. The plastisol washed off the equipment has a level of solvent that is often too high to be used in the process in question. Additionally, material from repeated wash cycles will be fed ultimately into the same c ......... | |
| (The original document is in English and was published in 2002). | |
| 877693 | COMPUTER AIDED STATISTICAL EXPERIMENTAL DESIGN FOR THE FORMULATING OF PVC PLASTISOLS . |
| PVC plastisol formulations have evolved over a long period of time to meet the ever changing technical requirements of the markets in which they are used - principally floorings, wallcoverings, synthetic leather, coated fabrics and sealants. Over the last ten years the use of computer programming to ......... | |
| (The original document is in English and was published in 2002). | |
| 871402 | RHEOLOGY OF PVC PLASTISOL - VIII. MECHANISM OF NON-LINEAR VISCOELASTIC BEHAVIOUR. |
| The frequency dependence and amplitude dependence of dynamic data and shear rate dependence of steady state flow data for PVC plastisols were analysed using a previously reported model of shear-induced phase separation into an immobilised layer and a mobile phase. The results obtained indicated that ......... | |
| (The original document is in English and was published in 2002). | |
| 856278 | RHEOLOGY OF PVC PLASTISOL . VII. EXPLORATION ON NON-LINEARITY OF VISCOELASTIC BEHAVIOR. |
| Non-linearity (strain-amplitude dependence) of viscoelastic behaviour was examined with a plastisol made with a commercial PVC resin dispersed in diethylhexyl phthalate at 50 vol %. The measurements were made in shear at room temp. in the frequency of 0.1 to 0.01 rad/s. The strain amplitude was from ......... | |
| (The original document is in English and was published in 2002). | |
| 852794 | USE OF ALUMINOSILICATES AS AN ALTERNATIVE TO TRADITIONAL WHITE PIGMENTS IN PVC PLASTISOLS . |
| The potential use of aluminosilicates as pigment extenders in PVC plastisols is considered and the results of tests carried out on PVC wall coverings, PVC foam and clear film containing, as an aluminosilicate, Zeocros E100, are reported. The data obtained show that partial replacement of titanium di ......... | |
| (The original document is in English and was published in 2002). | |
| 852764 | COMPUTER AIDED STATISTICAL EXPERIMENTAL DESIGN FOR THE FORMULATING OF PVC PLASTISOLS - NEW TRICKS FOR AN OLD DOG. |
| The effects of several variables, namely polymer particle size, polymer type, molec.wt., plasticiser level, filler level, pigment level, polymerisation method, plasticiser type and gelation conditions, on the final properties of a PVC plastisol formulation were investigated using E-Chip experimental ......... | |
| (The original document is in English and was published in 2002). | |
| 852756 | THE POTENTIAL RECOVERY OF PLASTICISER AND SOLVENT FROM WASTE PVC PLASTISOLS USING MEMBRANE SEPARATION TECHNOLOGY. |
| A study was carried out into the potential recovery of plasticiser and solvent from waste PVC plastisols using a ceramic multi-bore crossflow tube filter. The procedure employed to perform the test sequence involved clean water flux measurement, media acclimatisation, optimisation trial, concentrati ......... | |
| (The original document is in English and was published in 2002). | |
|
Helpdesk: Telephone +44 (0) 1939 252400 or Email polymerlibrary@rapra.net | |
